Bianco Pumpz BIA-INOX60PC Automatic Electronic Water Pump
The pump is a self-priming pressure system pump supplied wired and ready to install.
The self-priming ability provides excellent suction capacity. Used especially for supplying water to domestic installations.
Automatic electronic pump control fitted and wired.
Automatic electronic control provides run dry protection and constant pressure at low flows.
Automatic electronic control has in-built check valve.
Corrosion resistant pump body, diffuser and impeller.
Mechanical shaft seal.
240V single phase TEFC motor with in-built auto reset thermal overload.
Liquid: Clean water temperature range: 2 – 35 deg C
Materials: Pump body, Diffuser, Impeller: Stainless Steel, Technopolymer
Mechanical seal: Carbon/Ceramic/Nitrile
O rings: Nitrile
Installation: Maximum ambient temperature: 40 deg C
Maximum operating pressure: 6 bar
Pipe connections suction/discharge: 1” BSP F / 1” BSP M
Rated voltage: 240V Mains frequency: 50 Hz
Current: 2.6 amps Capacitor: 20 uF
Motor duty: Continuous Motor type: Asynchronous, TEFC
Motor protection: In-built thermal overload
Ingress protection: IP 54 Insulation class: F
Power cable length: 1.2 m Net weight: 9.1 kg
Dimensions: 340mm L x 405mm H x 230mm W