Makita DLX2455T Cordless Drill Driver Combo Kit 18v 5.0AH 2pcs
Features:
MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
The 18V Brushless Hammer Driver Drill provides 141Nm of maximum fastening torque and no load speed of 2,100rpm combining rapid drilling speeds with high levels of torque. This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
Not only has the performance on this model been increased but it is also considerably shorter. At 178mm in length this model is 27mm shorter than the previous model. Making it the most compact drill in its class and extremely comfortable to use in all applications.
Compact Design – for improved handling and control the overall length has been reduced by 27mm vs. the previous model
3 Drilling Modes – screwdriving mode (rotation with clutch) for achieving an even consistent finish when fastening screws. Drilling mode (rotation only) achieving 141Nm max. torque. Hammer Drilling mode (rotation with hammering) on the for drilling in masonry up to a maximum 16mm hole diameter.
LED Joblight – high brightness twin LED joblight with pre-glow and after glow functions. Illuminating the working area for greater visibility during application
High Power Output – This model has been redesigned with a newly designed motor and gear ratio achieving not only more power but also increasing the performance in continuous heavy-duty applications.
2 Speed Mechanical Gearing – high speed mode produces 2,100rpm for rapid drilling speed while low speed produces high levels of torque to suit high load operation.
All metal gear construction – allow for smoothly transfer of power in high load applications. While the highly durable materials ensure this tool has unmatched durability, and will continue to perform in years to come.
XPT – Extreme Protection Technology protects the tool against dust & moisture even in the harshest jobsite conditions, increasing durability
Specifications:
Max. drilling capacities in wood:
Auger bit: 50mm
Self-feeding bit: 76mm
Hole saw: 152mm
Max. drilling capacities in steel: 13mm
Max. drilling capacities in masonry: 16mm
No load speed:
Hi: 0 - 2,100rpm
Lo: 0 - 550rpm
Impact rate:
Hi: 0 - 31,500ipm
Lo: 0 - 8,250ipm
Max. peak torque: 141Nm
Max. tightening torque:
Hard: 130Nm
Soft: 65Nm
MAKITA 18V Brushless 1/4" Impact Driver Skin DTD172Z
4 stages of impact selection plus two T-modes, A-mode and bolt mode
On the go single hand impact selection button
Impressive 180Nm of max. fastening torque
XPT technology enhances dust and moisture protection
Ultra compact design with twin dual side LEDs
MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L
Integrated L.E.D. battery charge level indicator allows user to monitor battery charge
Up to 33% more run time per charge compared to BL1830
Fast 40 minute charging time
Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)
Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery
Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications
Battery resists self-discharge and remains ready for use even after long periods of storage
Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture
Star protection computer controls - includes overload protection, over-discharge protection and over heat protection
The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw
If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating
MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892
Fast charging - charges Li-Ion 3.0Ah battery in only22 minutes and Li-Ion Compact series batteries in only 15 mins
Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method
Forced air cooling fan - cools the battery to minimise charging time
Digital power display identifies the condition of the battery and charging condition
Includes:
1 x MAKITA 18V Brushless Hammer Drill Driver Skin DHP486Z
1 x MAKITA 18V Brushless 1/4" Impact Driver Skin DTD172Z
2 x MAKITA 18V 5.0Ah Lithium-Ion Battery BL1850B-L
1 x MAKITA 18V Lithium-Ion Battery Charger DC18RC 1955892
1 x MAKITA Carry Case
Delivery
For all orders up to 20kg and no longer than 1m to be delivered to regional and interstate areas, we use Australia Post and StarTrack Express with tracking provided sent to you via email.
For all orders above 20kg, we use StarTrack Express and Hunter Express.
All deliveries can be tracked online at all times via the shipping providers online tracking service.
Visit: www.auspost.com.au/track/ for Australia post tracking and enter tracking number given per order.
Visit: www.tntexpress.com.au/interaction/trackntrace.aspx for TNT Express tracking and enter tracking number given per order.
You will be notified as soon as your order is dispatched.
We will notify you by email or telephone in the event that:
- We are unable to deliver your order within the allocated time
- We are unable to fulfill your order
Delivery Times
If your order contains some items that are not listed as "in stock", we will dispatch the complete order once everything contained in the order has arrived in stock. This will normally take 2-10 working days. Should lead times be more than 10 working days we will contact you via e-mail or telephone.
Next day dispatch is defined as the next working day following your order placed between 8am and 3pm.
All orders received after 5pm Friday or on weekends will be dispatched the following Monday for delivery on Tuesday.
All orders will require a signature upon delivery in most cases unless 'authority to leave' is stated in the comments section of the order to pass this onto our shipping provider. In the event that the customer being absent when delivery is attempted, a card will be left detailing the drivers actions. The card will also contain details on how to arrange to collect from the local parcel company depot.
We do not authorise re-deliveries. Someone must be at the delivery address to sign and receive for the goods and answer the phone call from the courier company to arrange this. If you require a re-delivery, there will be an additional charge requested from the shipping provider.
Our carrier also offers a pallet delivery sevice for bulky orders. Please ensure that you have an appropriate offload facility for the receiving of pallets. There may be a surcharge for bulky orders. If so, we will contact you before we dispatch your order.
We recommend that you inspect the goods prior to signing for delivery. If you discover any damage to the packaging, sign for the goods as "damaged". If you are unable to inspect the goods right away, please ensure you sign for the goods as "unexamined" to allow us to take up any claims with our delivery partners if necessary.
Expected dates and shipping estimates of delivery are approximate. AUDEL shall not be liable for any delays or extra costs in delivery.
